HP XP7 Storage - Manual (Page 30)

6 Verifying and monitoring devices
This topic describes the procedures for verifying base and alias devices on the system, and the
syntax and description of the commands used to monitor PAV activities from the host computer.
The workflow for verifying and monitoring devices
Before you can verify and monitor devices, you must first define the mapping between base and
alias devices to the host operating system.
Use the following process to verify and monitor the base and alias devices on the system:
1. Verify the device definitions.
For more information about verifying device definitions, see (page 30) .
2. Verify the status of the devices for each channel path (CHP).
For more information about verifying device status per CHP, see (page 31) .
3. (If you restart the HP XP7 Storage while using HPAV) Complete the following:
a.
Verify that the correct aliases are assisted to a CU.
b. Verify that the correct aliases on a z/OS system (which is a guest operating system on
z/VM) are sustained to a CU.
Related topics
•
For more information about defining the mapping between the base and alias devices, see
(page 14) .
Verifying the device definitions
Use this task to verify that the host recognizes the devices as specified.
HP Confidential 30 Verifying and monitoring devices