HP XP7 Storage - Manual (Page 26)

4. From the CU list, select the CU image which contains the desired base volumes.
Base volumes are displayed in Base Volume List.
No volumes are displayed if the selected CU image only contains devices to which aliases
cannot be assigned, such as 3390-V type devices or journal volumes. In these cases, select
another CU image.
5. Select one or more base volumes in the Base Volume List.
6. Select one or more free volumes in the Free Volume List.
7. Click Add to assign the selected free volume(s) to the selected base volume(s). The assignments
appear in the Alias Volume List shown in the following figure.
8. Confirm the alias volume(s) assigned to the selected base volume(s) in the Alias Volume List.
9. Click Apply to apply the current alias assignments in the Alias Volume List.
HP Confidential 26 Performing Parallel Access Volumes operations