HP XP7 Storage - Manual (Page 27)

Related topics:
•
(page 47) .
Deleting alias volumes from base volumes
Alias volumes may be deleted from base volumes using the Parallel Access Volumes window.
Prerequisite
•
I/O operations are not currently being performed on the base device.
CAUTION: Deleting alias devices while I/O operations are occurring can cause a serious
failure.
•
You must have the Storage Administrator (Provisioning) role to perform this task.
•
You must enable the Remote Web Console secondary window. For more information, see the
HP XP7 Remote Web Console User Guide.
1. In the Remote Web Console main window, select Actions > Mainframe Connection > Parallel
Access Volumes.
2. Click to change to Modify mode.
3. In the Parallel Access Volumes window (shown in the following figure), select the LDKC which
includes the CU image to be modified from the LDKC list.
4. From the CU list, select the CU image which contains the aliases to be removed.
Base volumes are displayed in the Base Volume List.
No volumes are displayed if the selected CU image only contains devices to which aliases
cannot be assigned, such as 3390-V type devices or journal volumes. In these cases, select
another CU image.
5. Select one or more base volumes in the Base Volume List. Press Ctrl and click to select multiple
base volumes, press Shift and click to select a series of base volumes, or click Select All to
select all base volumes in the CU image. Alias volumes for each selected base volume(s)
appear in the Alias Volume List as shown in the following figure.
HP Confidential Deleting alias volumes from base volumes 27