HP Photosmart C4380 All-in-One Printer - Manual (Page 36)

Load paper
This section describes the procedure for loading different types and sizes of paper into
the HP All-in-One for your copies or printouts.
NOTE: After a copy or print job has started, the paper width sensor can determine
whether the paper is Letter, A4, or a smaller size.
TIP: To help prevent rips, wrinkles, and curled or bent edges, store all paper flat in
a resealable bag. If the paper is not stored properly, extreme changes in temperature
and humidity might result in curled paper that does not work well in the HP All-in-One.
This section contains the following topics:
• Load full-size paper
• Load 10 x 15 cm (4 x 6 inch) photo paper
• Load index cards
• Load envelopes
• Load other types of paper
Load full-size paper
You can load many types of letter or A4 paper into the input tray of the HP All-in-One.
To load full-size paper
1. Slide the paper-width guide to its outermost position.
NOTE: If you are using letter, A4, or smaller paper, make sure the tray extender
is open all the way.
2. Tap a stack of paper on a flat surface to align the edges, and then check the paper
for the following:
•
Make sure it is free of rips, dust, wrinkles, and curled or bent edges.
• Make sure all the paper in the stack is the same size and type.
Load paper 35
Loa
d
o
rig
in
als and load
paper