HP ProLiant DL140 G3 Server - Manual (Page 9)

System BIOS configuration 9
Advanced menu
Figure 5 Setup Advanced menu
Table 5 Advanced menu fields
Field Description Options
Reset Configuration
Data Select whether to erase data in the section of memory for ESCD (Extended
System Configuration Data) which stores the configuration settings for non-PnP
plug-in devices. Yes
No
NIC Option Select which LAN port to use for console redirection. Dedicated NIC
Side-band NIC
8042 Emulation
Support Select whether to enable emulation support for the 8042 keyboard controller.
Note: Users who intend to install the Red Hat Enterprise Linux 4, x64 Edition
or the SuSE Linux Enterprise Server 10, x64 Edition must set this field to
Disabled. Enabled
Disabled
NIC 1/2 MAC
Address Displays the Media Access Control (MAC) address for the LAN ports 1 and 2.
Dedicated NIC MAC Displays the MAC address for the dedicated LAN port.
Advanced Chipset
Control Displays the settings related to the system chipset functions.
Press Enter to access the related submenu.
USB Control Displays the settings related to USB device(s) functions.
Press Enter to access the related submenu.
Advanced Processor
Options Displays the settings related to the processor.
Press Enter to access the related submenu.
PCI Configuration Displays the settings related to the onboard Ethernet chipset and the expansion slots.
Press Enter to access the related submenu.
I/O Device
Configuration Displays the settings related to the serial port.
Press Enter to access the related submenu.
Console Redirection Displays console redirection-related settings.
Press Enter to access the related submenu.
IPMI Displays server management-related settings.
Press Enter to access the related submenu.