Section 2. customizing the installation, Section 3. completing the installation – HP ProLiant DL140 G3 Server User Manual
Page 46
Network operating system (NOS) installation 46
Section 1. Installing SUSE Linux Enterprise Server 10
1.
Turn on the server and insert the SUSE Linux Enterprise Server 10 (SLES10) CD 1.
2.
Reboot the system to the SLES10 CD 1.
3.
Select Installation, then press Enter to proceed to the customization of your installation.
Section 2. Customizing the Installation
Language
Select the language of choice you prefer for the installation, then click Accept to continue.
Media Check
Skip this stage of the installation. Click Next to continue.
License Agreement
Read the license agreement. If the terms of the agreement are acceptable, click Yes, I agree to the license
agreement, then click Next to continue.
Installation Mode
Click New Installation, then click Next to continue.
Clock and Time Zone
Modify the Clock and Time Zone settings, then click Next to continue.
Installation Setting
1.
Review the default installation settings and modify them to meet your network environment.
2.
Click Accept to initialize the installation process.
3.
Click Install to start the file copy process.
The system will automatically reboot once the first part of the file copying is completed. You may be prompted to
insert the rest of the SLES10 CD-ROMs, depending on the packages you have chosen to install.
Section 3. Completing the installation
Hostname and Domain Name
Set host name and domain name, then click Next to continue.
Password for the System Administrator
Enter a root password consisting of at least six alphanumeric characters, then click Next to continue.
Network Configuration
Review the Network Configuration settings and see to it that they fit your environment, then click Next to
continue.
Test Internet Connect
Review the Network Configuration settings and see to it that they fit your environment, then click Next to
continue.
Installation Setting
Review the installation settings once again, then click Next to continue.
User Authentication Method
Select the authentication method appropriate for your environment, then click Next to continue.