HP ProLiant DL140 G3 Server - Manual (Page 19)

System BIOS configuration 19
Power menu
Figure 22 Setup Power menu
Table 16 Power menu fields
Field Description Options
Resume on Modem Ring Select whether to wake up system when an incoming call is detected on
the modem (via the serial port). Off
On
Wake on LAN Select whether to wake up system when a LAN activity is detected (via
the onboard LAN controller or an add-on LAN card). Enabled
Disabled
After Power Failure Specify the power state to resume to after a system shutdown that is due
to an interruption in AC power. Last State
Stay Off
Power On
Exit menu
The Exit menu displays the several options on how to quit from the Setup Utility. Select any of the exit options
then press Enter.
Figure 23 Setup Exit menu
Table 17 Exit menu options
Option Description
Exit Saving Changes Save the changes made and close the Setup Utility.
Keyboard shortcut: F10
Exit Discarding Changes Discard changes made and close the Setup Utility.
Keyboard shortcut: Esc
Load Setup Defaults Loads the default settings for all BIOS setup fields.
Keyboard shortcut: F9
Discard Changes Discards all changes made in the Setup Utility.
Save Changes Saves changes made in the Setup Utility.