HP ProLiant DL140 G3 Server - Manual (Page 45)

Network operating system (NOS) installation 45
Section 3. Completing the installation
Root Password
Enter a root password consisting of at least six alphanumeric characters, then click Next to continue.
Network Configuration
Review the Network Configuration settings and see to it that they fit your environment, then click Next to
continue.
Test Internet Connect
Skip this test. You can test the network connection after completing the NOS installation. Click Next to proceed
with the installation.
Service Configuration
Review the Services settings and select those items that are required by your environment, then click Next to
continue.
User Authentication Method
Select the authentication method appropriate for your environment, then click Next to continue.
Add a New Local User
Follow the prompt to add a new local user account, then click Next to continue.
Release Note
Review the release notes, then click Next to continue.
Hardware Configuration
Review the default hardware settings and modify them if necessary, then click Next to continue.
NOTE: Skip the Graphic Cards settings.
Installation Completed
Click Finish to proceed to the login window.
SUSE Linux Enterprise Server 10 Installation
SUSE Linux Enterprise Server 10, x64 Edition pre-installation setup
The SuSE Linux Enterprise Server 10, x64 Edition does not support the 8042 keyboard controller. Users of this
Linux version should first disable the related BIOS Setup field before installing the Linux OS. Follow the steps
below.
1.
Turn on the monitor and the server.
2. During POST, press F10 to access the BIOS Setup Utility.
3. Press → to display the Advanced menu.
4. Set the 8042 Emulation Support field to Disabled.
5. Press F10 to save the changes you made and close the Setup Utility.
6. Proceed to the Linux OS installation.