Other phone features – Aastra Telecom 9133i (INSTALLATION GUIDE) User Manual
Page 14
11
Model 9133i Installation Guide
Other Phone Features
Other Phone Features
Adjusting the Volume
Pressing the volume button
u adjusts the receiver,
headset, speaker, and ringer
volume.
• To adjust the ringer volume,
leave the handset in the cradle
and press the volume button
u while there is no active
call. There are 8 settings for the
ringer — the display tempo-
rarily indicates the current ringer
volume setting.
• To adjust the handset volume, lift
the handset and press the volume
button while you are on a call.
The handset remains at this vol-
ume until it is adjusted again.
• To adjust the headset volume,
press the volume button while
you are on a call. The headset
remains at this volume until it is
adjusted again.
• To adjust the speaker volume,
press the volume button while
the speaker is activated (activate
the speaker by pressing e).
The speaker remains at this vol-
ume until it is adjusted again.
Status Lights
Speaker Light
• Speaker light is on solid.
A call is on Handsfree (speaker-
phone).
• Speaker light flashes slowly.
The headset is being used.
• Speaker light flashes quickly.
The call is muted. Press e to
take the call off mute.
Telephone Light
• Light flashes slowly.
There are un-heard messages.
• Light flashes quickly and the
ringer sounds.
There is an incoming call.
Timer
• When you make or answer a call,
the Timer shows the elapsed time
of the call.
Programmable keys
The 9133i has 7 programmable
keys that can be programmed for
speed dial or configured as extra
line keys. Contact your System
Administrator or see the 9133i User
Guide for more information on
programmable keys.
U
sing a Headset with your Tele-
phone
The 9133i accepts headsets through
the modular RJ22 jack on the back of
the phone. Contact your telephone
equipment retailer or distributor to
purchase a compatible headset.
Customers should read and observe
all safety recommendations
contained in headset operating
guides when using any headset.
Making and Receiving Calls
using a Headset
1
. Ensure that you have selected a
headset audio mode by accessing
the Options menu. See
“Customizing your phone” on
page 9
2
. Plug the headset into jack.
3
. Press the ef key to obtain dial
tone or answer an incoming call.
Depending on the Headset mode
selected from the Options menu a
dial tone or an incoming call is
received on either the headset or
the handsfree speakerphone.
4
. Press the N key to end the call.