Asus M2R-FVM - Manual (Page 70)

ASUS M2R-FVM 2-27
2.6.2 Boot Settings Configuration
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select Sub-menu F10: Save and Exit
Select Menu
Item Specific Help
Press [Enter] to
enable or disable.
Boot Settings Configuration
Quick Boot [Enabled]
Boot Up Floppy Seek [Enabled]
Bootup Num-Lock [On]
Full Screen LOGO [Enabled]
Halt On [No Errors]
Phoenix-Award BIOS CMOS Setup Utility
Boot
Quick Boot [Enabled]
Allows you to enable or disable the system quick boot feature. When
Enabled, the system skips certain tests while booting. Configuration
options: [Disabled] [Enabled]
Boot Up Floppy Seek [Enabled]
Enables or disables the floppy seek feature while booting. Setting to
Enabled, clears the chassis open status. Configuration options: [Disabled]
[Enabled]
Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock.
Configuration options: [Off] [On]
Full Screen LOGO [Enabled]
Allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
Make sure that the above item is set to [Enabled] if you want to use the
ASUS MyLogo™ feature.
Halt On [No Errors]
Allows you to select error report type.
Configuration options: [All Errors] [No Errors] [All, But Keyboard] [All, But
Diskette] [All, But Disk/Key]