HP Serveur lame HP ProLiant BL465c Gen8 - Manual (Page 554)

Figure 131 Example of replacing a primary volume disk
To replace the primary volume:
1. Execute the following RAID Manager command to delete the pair definition of the primary volume
to be replaced.
PROMPT> pairsplit -g SI01 -S
2. On the host that manages the primary volume, delete the volume.
In Windows Server 2003:
From the Start menu, choose Control Panel, Management Tool, and Computer Management.
Select Disk Management from the Computer Management window, right-click the partition
that you want to delete, and click Delete Partition.
In Windows Server 2008:
From the Start menu, choose Administrative Tools, and then open Server Manager. In the
Server Manager window, choose Storage, and then Disk Management. Right-click the volume
that you want to delete, and click Delete Volume.
In Windows Server 2012:
Open Server Manager. In the Server Manager window, choose File and Storage Services,
and then Volumes. Right click the volume that you want to delete, and click Delete Volume.
Replacing primary and secondary volume disks while Application Agent is running 554