HP Serveur lame HP ProLiant BL465c Gen8 - Manual (Page 109)

Specifying the retry count and interval for command execution status retry check
If you want to change the retry count and retry interval for retries of checking the status of the command
being executed by Application Agent, change the following parameters.
Table 13 Parameters in init.conf (to specifying a retry count and a retry interval for command execution
status retries checking)
Specifiable values
(default)
Description Parameter
0 to 3600
(0)
• Specify the maximum retry count. Generally this
value should be set to be other than
0 .
• If you specify 0 , Application Agent continues to
retry checking until it can confirm the command
status. For example, if you enter two commands
that cannot be executed at the same time, the
command entered later will perform retries con-
tinuously until the command entered earlier fin-
ishes.
COM_RETRY_TIME
0 to 3600
(10) For this parameter, specify the same number of
seconds as the retry interval for checking the com-
mand status.
COM_RETRY_WAIT
Setting up the backup option for SQL Server database backup
To shorten the time required for backup when the drmsqlbackup command is executed, you can
skip the confirmation of the SQL Server database status. If you want to shorten the time required for
backup, specify the following parameter.
Table 14 Parameter in init.conf (backup option)
Specifiable values
(default)
Description Parameter
0 or 1
(none)
Set this parameter to skip the confirmation of the
SQL Server database status and thereby shorten
the time required for backup when the
drmsqlbackup command is executed. If 0 is
specified, or this parameter is not specified,
Application Agent will check the database status.
If you specify
1 , Application Agent will skip the
confirmation of the database status.
Generally, this parameter should be set to
0 .
SQL_QUICK_BACKUP
In addition to changing the parameter, check the following to shorten the time required for backup:
• Make sure that the database to be backed up is online.
If the database to be backed up is not online, an error occurs at the time the backup operation is
performed on an SQL Server database.
• Make sure that the RAID Manager instance that manages the copy group to be operated is running.
If the RAID Manager instance is not running, an error occurs when the RAID Manager command
is issued.
Application Agent CLI User Guide 109