HP Serveur lame HP ProLiant BL465c Gen8 User Manual
Page 420
4.
Receive the temporary files on the database server.
To batch-receive the temporary files held on the backup server onto the database server, execute
EX_DRM_FTP_GET
on the database server. In this example, the user ID used for logon to the
FTP server is
admin
and the password is
password
. Temporary files are stored in the temporary
folder for extended commands, on the database server.
DBServer > EX_DRM_FTP_GET Operation_A -server BKServer -user admin -password password
5.
Import the temporary files, which were transmitted from the database server, into the backup
catalog on the database server.
To import the temporary files, which were transmitted from the database server, into the backup
catalog on the database server, execute
EX_DRM_DB_IMPORT
on the database server.
DBServer >EX_DRM_DB_IMPORT Operation_A
6.
Restore the data from the secondary volume to the primary volume.
Restore the data by resynchronizing the primary and secondary volumes. To restore the data,
execute
EX_DRM_EXG_RESTORE
on the database server.
DBServer > EX_DRM_EXG_RESTORE Operation_A -resync -recovery
Supplementary information
If data was backed up using VSS, the data can be restored in units of Information Stores. To restore
data in units of Information Stores, specify the Information Store name in the
-target
option.
An example of executing the
drmexgcat
command immediately before restoring data from the
secondary volume to the primary volume is shown below:
DBServer > drmexgcat -target STORAGE_1
STORAGEGROUP: STORAGE_1
BACKUP-ID:0000000002 BACKUP-MODE: VSS STORAGEGROUP: STORAGE_1 ORIGINAL-ID:0000000001
START-TIME:2002/06/01 10:30:00 END-TIME: 2002/06/01 10:31:00 HOSTNAME:DBServer
T OBJECT INFORMATIONSTORE FILE FS DG DEVICE
COPY-GROUP
M MAILBOXSTORE MAILBOX1(STORAGE_1) E:\STR1\priv1.edb E: - Harddisk3
VG01,vol01
- - - - - - -
VG01,vol01
M MAILBOXSTORE MAILBOX1(STORAGE_1) E:\STR1\priv1.stm E: - Harddisk3
VG01,vol01
- - - - - - -
VG01,vol01
:
:
The following is an example of executing restoration when the backup data shown above exists,
and you want to restore only Information Store
MAILBOX1
that belongs to storage group
STOR-
AGE_1
:
DBServer > EX_DRM_EXG_RESTORE Operation_A -resync -recovery -target STORAGE_1\MAILBOX1
To perform restoration in units of Information Stores, you need to execute a roll-forward with the
-recovery
option specified. For details on roll-forward, see “
Restoring by using transaction logs
Operation for Exchange databases
420