Maximum number of sessions, Session timeout, Ui timeout – HP Integrity rx4640 Server User Manual
Page 68: Log level, Port 2301, Session timeout ui timeout log level port 2301

Maximum Number of Sessions
By default, HP SMH supports 128 user sessions. This number can be lowered to 32 or raised to 500 using
the session-maximum setting.
smhconfig -S|--session-maximum [=] maximum-number-of-sessions
Session Timeout
The default session timer is set to 15 minutes. The session timeout can be set as low as 1 minute or as high
as 60 minutes.
smhconfig -U|--session-timeout [=] session-timeout-in-minutes
UI Timeout
The UI timeout value represents the maximum amount of time in seconds that the HP SMH user interface (UI)
waits for data requested from webapps.
The UI timeout can be set in the range of 10 seconds to 3600 seconds.
Use the following command used to set the UI Timeout in seconds:
smhconfig –B|--ui-timeout[=] NUM
where, NUM is the value (in seconds) between the range 10 seconds to 3600 seconds.
Log Level
By default, the logging level of HP SMH error messages is set to error. When a log level is set, all events
that are the same or superior to the configured log level are written to the log file. The log level option only
affects the error_log file located under SystemDrive:\hp\hpsmh\logs in Windows and under
/var/spool/opt/hp/hpsmh/logs
in Linux.
The following values are available, in order of decreasing significance:
Table 12-2 Log level
Description
Value
Emergencies - system is unusable
emerg
Action must be taken immediately
alert
Critical conditions
crit
Error conditions
error
Warning conditions
warn
Normal but significant condition
notice
Informational
info
Debug-level messages
debug
smhconfig -v|--log-level [=] logging-level
NOTE:
Log level only affects new messages written in the HTTP error log. You must perform a soft restart
of the system.
Port 2301
Port 2301 determines whether HP SMH listens on port 2301. If the value is set to True, HP SMH listens on
port 2301. If the value is set to False, HP SMH does not listen on port 2301.
The default is to listen on port 2301.
smhconfig -T|--port2301 [=] True | False
68
Command Line Interface Configuration
- Integrity rx7620 Server Integrity BL870c Server-Blade Integrity rx2660 Servers Integrity rx2600 Servers Integrity rx2800 i2 Server Integrity rx8620 Server Integrity rx6600 Server Integrity rx2620 Servers System Management Homepage-Software Integrity rx1620 Servers Integrity rx7640 Server Integrity rx8640 Server Integrity Superdome sx2000 Server Systems Insight Manager Integrity rx3600 Server Integrity BL870c i2 Server-Blade Integrity BL860c i2 Server-Blade Integrity Superdome sx1000 Server Integrity BL860c Server-Blade Integrity rx5670 Server