HP Integrity rx4640 Server - Manual (Page 38)

5. To enable Autostart mode, check Autostart check box. To disable Autostart mode, uncheck Autostart
check box.
NOTE: Enabling the Autosart mode, enables port 2301 automatically, if it is disabled.
NOTE: Enabling Autostart mode enables server timeout (in minutes) text box which provides you with
the option to set the server timeout duration, value between 0 and 60. The default timeout value is 30
minutes.
6. Click Apply.
Port 2301 (Windows only)
The Port 2301 link provides options to enable or disable Port 2301. The default value, enabled, which
preserves the compatibility with
HP Web-enabled System Management Software .
2 1 Apply
Record the option into the XML
configuration file.
Enable Port 2301
Sets Port 2301 as enabled or
disabed.
IMPORTANT: Consider the following before you disable port 2301:
If you disable port 2301 when HP SMH is in autostart URL mode, the start mode automatically changes
to start on boot mode. ▲
To disable Port 2301, complete the following steps:
1. Select Settings from the menu.
2. In the System Management Homepage box, click the Security link.
3. Click the Port 2301 link.
4. In the Configuration box, clear the Enable Port 2301 check box.
5. Click Apply.
To enable Port 2301, complete the following steps:
1. Select Settings from the menu
2. In the System Management Homepage box, click the Security link.
3. Click the Port 2301 link.
4. In the Configuration box, select the Enable Port 2301 check box.
5. Click Apply.
Timeouts Category
The Timeouts link provides options to configure the values of the Session timeout and UI timeout.
38 The Settings Page