AT&T 1782 - Manual (Page 41)

38
Voice Help Menu
The Voice Help Menu allows you to use the answering system from a touch tone
telephone, even if you do not know or remember the various command codes. Once you
have connected with the answering system, press
5. The system announces a list of
operations and the buttons you need to press. At the end of the list, the system beeps
twice to indicate it is ready to accept a command. You can access the Voice Help Menu
any time after the system has given you the two-beep signal that it is ready to accept a
command.
Memory Full
The system answers after 10 rings, announces “Memory is full,” and beeps twice.
1 Connect with the answering system.
2 Enter your Remote Access Code after the two-beep signal.
3 Listen to messages and delete some or all of them.
4 Press
0 0, 0 1, or 0 2 to make sure your system is turned on before you
hang up.
ANSWERING SYSTEM OPERATION
From a Remote Touch Tone Phone
1782_book_1AT&T 5/1/00 7:35 PM Page 38