Set up system features, Feature setup, Set the time and date – AT&T 1782 User Manual
Page 15
12
Feature Setup
NOTE: The system must be turned on to set up or change features.
You can set up one feature at a time, or you can set up a feature and then move on to set
up another feature. After you change one feature, use the softkey to select
OK to move to
another feature. If you change only one feature, you can continue to select
OK until the
screen exits the Feature Setup mode.
NOTE: If the unit does not receive a command within 30 seconds, it automatically
exits the Feature Setup mode.
Set the Time and Date
The system automatically resets the time and date each time new call information is
received. However, you must set the time/date yourself once for the day announced with
your messages to be correct.
1 Press
o.
2 Use the softkey to select
CLOCK.
3 Press
C or c to change the hour setting.
4 Select
NEXT to move to the minutes setting.
5 Press
C or c to change the minutes setting.
6 Select
NEXT to move to AM or PM.
7 Press
C or c to change the setting.
8 Select
DONE.
9 Press
C or c to change the month setting.
10 Select
NEXT to move to the day setting.
11 Press
C or c to change the day setting.
12 Select
NEXT to move to the year setting.
13 Press
C or c to change the year setting.
14 Select
DONE.
NOTE: You can select
DONE to exit without changing a setting.
SET UP SYSTEM FEATURES
1782_book_1AT&T 5/1/00 7:35 PM Page 12