AT&T 1782 - Manual (Page 36)

33
Record a Telephone Conversation
NOTE: This unit does not sound warning beeps to let the other party know that the
call is being recorded. To ensure that you are in compliance with any state and federal
regulations concerning recording a telephone call, you should start the recording
process and then inform the caller that you are recording the call.
1 Press twice at any time during a phone conversation.
2 Use the softkey to select L1 or L2.
3 Press P or press the softkey to select STOP to stop recording. The
conversation is saved with messages, and played back as a message.
NOTE: You must press P to end the recording. Hanging up the phone without
pressing P does not stop recording, and the system will continue recording until
all available memory is used.
When Memory is Full
When the memory is full, the system answers calls after 10 rings, and sounds two beeps
instead of your announcement. The screen displays
Memory Is Full.
ANSWERING SYSTEM OPERATION
1782_book_1AT&T 5/1/00 7:35 PM Page 33