AT&T 1782 - Manual (Page 39)

36
End the Remote Access Call
Press * 9. The system announces,“The machine will now hang up,” and disconnects
from the line.
Change Remote Access Code
1 Connect with the answering system.
2 Press
9 9. The system announces,“Enter new code.”
3 Enter your new Remote Access Code (any number between 000 and 999).
4 If a valid code is entered, the system announces the new Remote Access Code.
If an invalid code is entered, the system beeps rapidly five times, then beeps twice.
Repeat
Steps 2 and 3.
Turn System Off
1 Connect with the answering system.
2 Press
8 0 to turn the system off for both lines
— OR —
Press
8 1 to turn the system off for Line 1
— OR —
Press
8 2 to turn the system off for Line 2.
ANSWERING SYSTEM OPERATION
From a Remote Touch Tone Phone
1782_book_1AT&T 5/1/00 7:35 PM Page 36