HP Matrix Operating Environment Software User Manual
Page 15
remote_storage_id= Remote Site> NOTE: Volumes in the Storage Replication Group (identified by srg_name) are replicated between the local storage system (identified by local_storage_id) and the remote storage • For failoversrg.cmd: local_sms_name= Site> local_sms_username= the Local Site> local_storage_id= Local Site> remote_sms_name= Site> remote_sms_username= the Remote Site> remote_storage_id= Remote Site> srg_name= use_non_current_data= NOTE: A value of yes requires the Storage Replication Group to be failed over even in cases where the data at the destination site may not be current. A value of no requires storage Example invocations of Matrix recovery management User Defined adapter implementation • During Storage Management Server configuration in Matrix recovery management: • During Storage Replication Group configuration in Matrix recovery management: • During an Activate operation in Matrix recovery management: Command return code Commands must return 0 on successful completion, and a nonzero error code indicates failure. Multiple User Defined storage adapters Matrix recovery management supports multiple User Defined storage adapters to co-exist in a Setting up Storage 15
system (identified by remote_storage_id).
failover to fail if the data at the destination is not current.
sms_username=admin
sms_username=admin local_storage_id=emc_id1 remote_storage_id=emc_id2 srg_name=SRG1
local_sms_username=admin local_storage_id=emc_id1 remote_sms_name=EMC_SMS2 remote_user_name=admin
remote_storage_id=emc_id2 srg_name=SRG1 use_non_current_data=yes
Matrix recovery management configuration. For each User Defined storage adapter type, you can
create a new subdirectory and place your implementation of the three commands for that storage
type. For example, to add a storage adapter named EMC, create an EMC subdirectory under