Removing computer from case – PRG Mbox EXtreme User Manual
Page 55
T
ROUBLESHOOTING
AND
M
AINTENANCE
: R
OUTINE
M
AINTENANCE
0 2. 9 8 0 0. 0 0 01
47
5
Removing Computer from Case
The Macintosh® G5 computer can be removed from the case to be cleaned or replaced. Two
configurations of the Mbox Extreme case exist: one case contains two mounting brackets that attach to
the computer and the other contains only foam encasing the computer.
To remove Mac G5 computer with mounting brackets:
Step 1. At rear of case, disconnect all cables from Mac G5 computer.
Step 2. At front of case, remove four 8mm mounting bracket screws.
Step 3. At rear of case, remove four 8mm mounting bracket screws.
Step 4. Carefully slide Mac G5 computer through front of case.
To remove Mac G5 computer with foam-only mounting:
Step 1. At rear of case, disconnect all cables from Mac G5 computer.
Step 2. Carefully slide Mac G5 computer through front of case.