1 thumb memory access instructions, Thumb memory access instructions -4 – ARM VERSION 1.2 User Manual
Page 198

Thumb Instruction Reference
5-4
Copyright © 2000, 2001 ARM Limited. All rights reserved.
ARM DUI 0068B
5.1
Thumb memory access instructions
This section contains the following subsections:
•
LDR and STR, immediate offset on page 5-5
Load Register and Store Register. Address in memory specified as an immediate
offset from a value in a register.
•
LDR and STR, register offset on page 5-7
Load Register and Store Register. Address in memory specified as a
register-based offset from a value in a register.
•
LDR and STR, pc or sp relative on page 5-9
Load Register and Store Register. Address in memory specified as an immediate
offset from a value in the pc or the sp.
•
Push low registers, and optionally the LR, onto the stack.
Pop low registers, and optionally the pc, off the stack.
•
Load and store multiple registers.