Burst image capture -cont'd – Argus Camera DC3650 User Manual
Page 46

46
6
6 Determine the image composition while looking into LCD
monitor or viewfinder and adjust the image range and size
with the or key.
• When the key is pressed, the image size becomes large (Telephoto mode),
When the key is pressed, the image range becomes wide (Wide-angle
mode).
7
7 Press the shutter-release button part-way down.
8
8 Press and hold the shutter-release button all-the –way down.
• When your finger is lifted from the shutter-release button or the maximum
number of picture is taken, the continuous shot is completed.
• When taking a continuous shot, the focus and exposure adjustments are
determined when the shutter-release button is pressed part-way down and
these adjustments are applied to all imaged in the continuous shot mode.
• Even after taking a sequence shot, the continuous shot mode capture is not
cancelled. The single shot mode returns when the camera is turned off and
on again.
BURST IMAGE CAPTURE -CONT'D