Argus Camera DC3650 - Manual (Page 31)

31
BASIC RECORDING PROCEDURE
1 1 Rotate the function dial to .
2 2 Slide the power switch to turn on the camera.
• The power switch returns to the initial position.
3 3 Determine the image composition while looking into LCD
monitor or viewfinder.
• When holding the camera, be sure not to cover the lens with your fingers and
so on.
• When the focus is not adjusted on the subject, use the focus lock function
(see page 37).
4 4 Adjust the image range and size with the / keys.
• When the key is pressed, the image size becomes large (Telephoto
mode). When the key is pressed, the image range becomes wide (Wide-
angle mode).