LG 60PB4D - Manual (Page 35)

EXTERNAL EQ
UIPMENT SETUP
34
EXTERNAL EQUIPMENT SETUP
Screen Setup for PC mode
Overview
When RGB connect to PC output and select the RGB-PC in Main
Input, this function is used.
When HDMI IN 1(DVI) connect to PC output and select
HDMI1/DVI input, this function is used.
In RGB-DTV mode, SIZE and PHASE is not available.
Position G
Size
Phase
Reset
Adjust Close
Position
Size
Phase
Reset G
FLASHBK
APM
CC
Initialize Settings
Yes No
Adjust Previous Move Select
Position This function is to adjust picture
to left/right and up/down as you
prefer.
Size This function is to minimize any
vertical bars or stripes visible on
the screen background. And the
horizontal screen size will also
change.
Phase This function allows you to
remove any horizontal noise and
clear or sharpen the image of char-
acters. In HDMI/DVI-PC mode,
PHASE is not available.
Press the ADJUST button and then use D or E button to
select Position, Size, or Phase.
Press the ENTER button and then use D / E or F / G
button to make appropriate adjustments.
■ The Phase adjustment range is -16 ~ +16.
■ The Size adjustment range is -30 ~ +30.
Press the ENTER button.
Adjustment for screen Position, Size, Phase, Reset
Press the ADJUST button and then use D or E button to
select Reset.
Press the ENTER button and then use F or G button to
select Yes.
Press the ENTER button.
Initializing (Reset to original factory values)
2
3
1
2
3
1
To initialize the adjusted values.