LG HW301G - Manual (Page 26)

26 ENTERTAINMENT
5
Press the Navigation buttons to
type in an IP address and press OK.
- PC Setting: Internet Protocol(TCP/
IP) of PC needs to be set
manually. IP address, Subnet
Mask, and default Gateway can
be set with your own discretion.
e.g.) IP address: 192.168.0.1 /
Subnet Mask: 255.255.255.0
/ default Gateway:
192.168.0.10
- Projector Setting: Verify IP
address and gateway of PC. Input
Gateway address of PC to IP
Address, and IP Address of PC to
Gateway, and select Enter.
e.g.) IP address: 192.168.0.10 /
Subnet Mask: 255.255.255.0
/ default Gateway:
192.168.0.1
6
Press the Navigation buttons to
select Close after Network setting
is completed.
7
Press the OK.
Tips for Network Setting
y Many network connection problems
during set up can often be fixed
by re-setting the router or modem.
After connecting the player to the
home network, quickly power off
and/or disconnect the power cable
of the home network router or cable
modem. Then power on and/or
connect the power cable again.
y Depending on the internet service
provider (ISP), the number of
devices that can receive internet
service may be limited by the
applicable terms of service. For
details, contact your ISP.
y LG is not responsible for any
malfunction of the projector and/
or the internet connection failure
due to communication errors/
malfunctions associated with your
broadband internet connection, or
other connected equipment.
y LG is not responsible for problems
within your internet connection.
y Some content available through the
network connection may not be
compatible with the projector. If you
have questions about such content,
please contact the producer of the
content.
y You may experience undesired
results if the network connection
speed does not meet the
requirements of the content being
accessed.