LG VS950 - Manual (Page 65)

63
Connecting to Networks and Devices
Using the Status Bar to change the settings
The Status Bar displays the current USB connection mode so you can easily
open the Status Bar and change the settings as needed.
When connected via USB, the current USB connection mode also appears
on the Notifications panel. Tap the connection setting to display a screen
where you can change the USB connection mode.
NOTE If the Ask on connection checkbox is marked, the screen is only provided during USB
connection. If Autorun fails to run, the device automatically switches to Media sync (MTP)
mode.
Step 1. Connecting the phone to a PC
Connect your phone to your PC with a compatible USB Cable
(supplied). LG Autorun starts automatically.
Click ‘I accept the terms in the agreement’ then ‘Yes’.
NOTES • USB Autorun is only supported for Windows ® XP, Windows ® Vista, and Windows ® 7.
• The USB Autorun feature works only under an Administrator account. The installer has
insufficient privileges under a Non-Administrator account. Log on as Administrator. The
device is switched back to the Media sync (MTP) mode within 30 seconds. If Autorun
fails to run, the device automatically switches to Media sync (MTP) mode.
Step 2. Downloading the LG USB Modem Driver.
NOTES • If a previous version of the LG USB Modem driver is installed in the computer, it will
automatically be updated to the recent version.