beautypg.com

Updating the bios file – Asus Motherboard NCLV-D2 Series User Manual

Page 65

background image

A S U S N C L V - D 2 S e r i e s

A S U S N C L V - D 2 S e r i e s

A S U S N C L V - D 2 S e r i e s

A S U S N C L V - D 2 S e r i e s

A S U S N C L V - D 2 S e r i e s

4 - 3

4 - 3

4 - 3

4 - 3

4 - 3

2.

Copy the AFUDOS utility (afudos.exe) from the motherboard support
CD to the bootable floppy disk you created earlier.

3.

Boot the system in DOS mode, then at the prompt type:

afudos /i[filename]

where [filename] is the latest or the original BIOS file on the bootable
floppy disk.

Updating the BIOS file

Updating the BIOS file

Updating the BIOS file

Updating the BIOS file

Updating the BIOS file

To update the BIOS file using the AFUDOS utility:

1.

Visit the ASUS website (www.asus.com) and download the latest BIOS
file for the motherboard. Save the BIOS file to a bootable floppy disk.

A:\>afudos /iNCLVDS2.rom

Write the BIOS filename on a piece of paper. You need to type the exact
BIOS filename at the DOS prompt.

Use the appropriate BIOS file depending on your motherboard model
(e.g. NCLVD2SATA.ROM or NCLVDS2.ROM)

A:\>afudos /iNCLVDS2.ROM

AMI Firmware Update Utility - Version 1.19(ASUS V2.07(03.11.24BB))

Copyright (C) 2002 American Megatrends, Inc. All rights reserved.

WARNING!! Do not turn off power during flash BIOS

Reading file ....... done

Reading flash ...... done

Advance Check ......

Erasing flash ...... done

Writing flash ...... 0x0008CC00 (9%)

4.

The utility verifies the file and starts updating the BIOS.

Do not shut down or reset the system while updating the BIOS to
prevent system boot failure!

This manual is related to the following products: