Asus Motherboard NCLV-D2 Series - Manual (Page 50)

2 - 3 0 2 - 3 0 2 - 3 0 2 - 3 0 2 - 3 0 C h a p t e r 2 : H a r d w a r e i n f o r m a t i o n C h a p t e r 2 : H a r d w a r e i n f o r m a t i o n C h a p t e r 2 : H a r d w a r e i n f o r m a t i o n C h a p t e r 2 : H a r d w a r e i n f o r m a t i o n C h a p t e r 2 : H a r d w a r e i n f o r m a t i o n
6 . 6 . 6 . 6 . 6 . U l t r a 3 2 0 S C S I c o n n e c t o r ( 6 8 - p i n S C S I 1 ) U l t r a 3 2 0 S C S I c o n n e c t o r ( 6 8 - p i n S C S I 1 ) U l t r a 3 2 0 S C S I c o n n e c t o r ( 6 8 - p i n S C S I 1 ) U l t r a 3 2 0 S C S I c o n n e c t o r ( 6 8 - p i n S C S I 1 ) U l t r a 3 2 0 S C S I c o n n e c t o r ( 6 8 - p i n S C S I 1 )
(NCLV-D2/SATA model only)
This motherboard comes with the Adaptec
® AIC-7901X PCI-X SCSI
controller that supports one 68-Pin Ultra320 SCSI connector. The SCSI
channel can support a maximum of 15 SCSI devices as specified by
Ultra320 standards.
S C S I C o n n e c t i o n N o t e s S C S I C o n n e c t i o n N o t e s S C S I C o n n e c t i o n N o t e s S C S I C o n n e c t i o n N o t e s S C S I C o n n e c t i o n N o t e s
This motherboard has a 68-Pin Ultra320 SCSI connector.
The onboard SCSI chipset incorporates an advanced multimode I/O cell
that supports both single-ended (SE), Ultra2, Ultra160, and Ultra320
devices. With Ultra320 devices, the SCSI bus platform performs at full
Ultra320 speeds (up to 320 MB/s) and extended cabling 12m (or
25m in a point-to-point configuration). When an SE device is attached,
the bus defaults to an SE speed and 1.5m cable length.
Connect SCSI devices as specified. A SCSI channel should have only one
type of SCSI standard (e.g. Ultra320, Ultra160, Ultra2, Ultra-Wide).
Mixing SCSI devices on a single channel decreases performance of the
slower device.
NCLV-D2 Series Onboard SCSI connector
35
68 34
1
SCSI1
68-Pin Ultra320/
Ultra2-Wide SCSI Connector