Asus Motherboard NCLV-D2 Series - Manual (Page 17)

A S U S N C L V - D 2 S e r i e s A S U S N C L V - D 2 S e r i e s A S U S N C L V - D 2 S e r i e s A S U S N C L V - D 2 S e r i e s A S U S N C L V - D 2 S e r i e s 1 - 3 1 - 3 1 - 3 1 - 3 1 - 3
Serial ATA technology Serial ATA technology Serial ATA technology Serial ATA technology Serial ATA technology
The motherboard supports the Serial ATA technology through the Serial ATA
interfaces controlled by the Intel
® 6300ESB. The SATA specification allows
for thinner, more flexible cables with lower pin count, reduced voltage
requirement, and up to 150 MB/s data transfer rate.
Built-in SATA RAID solution Built-in SATA RAID solution Built-in SATA RAID solution Built-in SATA RAID solution Built-in SATA RAID solution
The Intel ® 6300ESB allows RAID 0 and RAID 1 configuration for two SATA
connectors via the LSI Logic Embedded SATA RAID controller. See pages
2-28 and 5-4 for details.
Zero-Channel RAID (ZCR) solution Zero-Channel RAID (ZCR) solution Zero-Channel RAID (ZCR) solution Zero-Channel RAID (ZCR) solution Zero-Channel RAID (ZCR) solution
The motherboard comes with a 64-bit PCI-X slot for an optional
Zero-Channel RAID card. The Zero-Channel RAID card alows you to create all
types of RAID configurations for your storage devices. The ZCR capability
provides a cost-effective, reliable, and high-performance RAID solution. See
page 2-19 for details.
Gigabit LAN solution Gigabit LAN solution Gigabit LAN solution Gigabit LAN solution Gigabit LAN solution
The motherboard comes with dual Gigabit LAN controllers and ports to
provide a total solution for your networking needs. The onboard Broadcom
®
BCM5721 and BCM5705E Gigabit LAN controllers use the PCI Express and
PCI interfaces, respectively, and have network throughput close to Gigabit
bandwidth. See page 2-26 for details.
USB 2.0 technology USB 2.0 technology USB 2.0 technology USB 2.0 technology USB 2.0 technology
The motherboard implements the Universal Serial Bus (USB) 2.0
specification, dramatically increasing the connection speed from the
12 Mbps bandwidth on USB 1.1 to a fast 480 Mbps on USB 2.0. USB 2.0 is
backward compatible with USB 1.1. See pages 2-26 and 2-31 for details.
Temperature, fan, and voltage monitoring Temperature, fan, and voltage monitoring Temperature, fan, and voltage monitoring Temperature, fan, and voltage monitoring Temperature, fan, and voltage monitoring
The CPU temperature is monitored by the ASIC (integrated in the Winbond
hardware monitor) to prevent overheating and damage. The system fan
rotations per minute (RPM) is monitored for timely failure detection. The
ASIC monitors the voltage levels to ensure stable supply of current for
critical components. See page 4-28 for details.