Acer PCI Disk Array Controller Drivers 08P4100 - Manual (Page 33)

Windows NT
Manual No. 775079 3-9
3 W
I
N
N
T
11. If there is an existing Mylex driver in the system you will see the box
shown below in Figure 3-9. Click New to install the new driver from
the diskette.
Figure 3-9. Install the New Driver from Diskette
12. Again, be sure the path is A:\NT4 as shown in Figure 3-10 and click
Continue.
Figure 3-10. Confirm Diskette Driver Path
The driver is copied from the diskette. The System Settings Change
box is displayed as shown in Figure 3-11.
Figure 3-11. Driver Installation Complete - DO NOT Restart
13. Click No at this time if you choose to install the Mylex Accelerated
Driver before restarting Windows NT 4.0. Do not install the
Accelerated Driver if you will be using Clustering or PCI Hot Plug,
or when mixing earlier and current Mylex controller.
(Please refer to the README file for details.) Continue with Step 14.