Bosch NETP666SUC - Manual (Page 18)

18
Changing the basic settings
The cooktop should be turned off.
1. Turn on the cooktop with the main switch.
2. Within the next 10 seconds, touch the Timer key for
4 seconds.
™‚ appears in the timer display. ‹ appears on the
display of the front left element.
3. Touch the Timer key until the number of the desired
basic setting appears in the timer display.
4. Select the required setting using the number keys. For
basic settings with a double digit input ( ™† ) the value
is distributed to the left and right front element display.
5. Touch the Timer key again for 4 seconds. The setting
is activated.
Leaving the basic settings
Turn off the cooktop with the main switch.
™† Automatic timer
‹ Off*
‚ - ŠŠ Automatic shut-off time
™‡ Duration of timer end signal
‚ 10 seconds*
ƒ 30 seconds
„ 1 minute
™ˆ Activation of additional heating elements
‹ Off
‚ On*.
ƒ Last setting before turning off the heating element
™Š Selection time for cooking zone
‹ Unlimited*: You can adjust the settings of the last cooking zone used at any time without having to
select it again.
‚ Restricted: You can adjust the settings for the last cooking zone used within 10 seconds after select-
ing it. After that you will have to reselect the cooking zone before setting it.
™‹ Reset to basic settings
‹ Off*
‚ Reset the appliance to basic settings
Display Function
*factory settings
0O0GG 5JNFS $MFBO-PDL
$IJME-PDL
1PXFS
4UBSU
,FFQ
8BSN 1SPHSBNT $IFG
"VUP
¯
0O0GG 5JNFS $MFBO-PDL
$IJME-PDL
1PXFS
4UBSU
,FFQ
8BSN 1SPHSBNT $IFG
"VUP
‚
‚
›