Bosch HGS7282UC - Manual (Page 41)

Cleaning and Maintenance
English 37
Important: Do not use Commercial Oven Cleaners on the self-clean oven or any
part because they will damage the finish or part.
Setting the Self-Clean Mode 1. Press COOKING MODE.
2. Turn knob until SELF CLEAN mode appears. Press START.
3. The default cleaning time is 4 hours. To
change cleaning time, turn knob to change
number of hours. Otherwise, continue to
step 4.
4. Press START. SELF CLEAN flashes. Press
START.
5. REMOVE RACKS appears in the display
as a reminder to remove oven racks.
6. Press START again to begin the self-
clean.
Note: The door locks at the beginning of the
cycle; The door lock symbol will appear in the display at this point. If door does not
lock, press OFF and do not self-clean; phone service.
Delaying the Start of
the Self-Clean Note: The time of day must be correctly set for this option to work properly. See
section “Setting the Clock” in “Setting Up Your Range”.
1. Press COOKING MODE.
2. Turn knob until SELF CLEAN mode appears. Press START.
3. The default cleaning time is 4 hours. To change cleaning time, turn knob to
change number of hours. Otherwise, continue to step 4.
4. Press START.
5. Turn knob until DELAYED CLEAN mode
appears. Press START.
6. SELF CLEAN END appears in the display.
7. Turn knob to enter the time of day you want
the self-clean to end: Set hours, press time,
set minutes.
8. Press START. The display will remind you to
remove oven racks.
9. Press START. The display shows DELAYED CLEAN. The self-clean will auto-
matically start at the appropriate time.
Note: In the Delayed Self-Clean Mode, the door latch automatically activates at
the beginning of the cycle. The door lock symbol will appear in the display.
Note: The oven lights do not operate in the Self-Clean mode.
After Self-Cleaning 1. At the end of the programmed cleaning time, the oven will automatically turn
off. SELF CLEAN END appears in the display. Press OFF to clear.
Note: The door will not unlock until the oven reaches a safe temperature.
2. The self-clean mode may produce ash which will settle in the bottom of the
oven. If this happens, remove ash with a damp cloth before using the oven.
3. Wipe rack edges with cooking oil to allow for proper glide. Wipe off excess.
After self-cleaning, the entire oven can be safely cleaned with a soapy sponge,
rinsed and dried. If stubborn soil remains, follow the guidelines on this page.
• Always use the mildest cleaner that will remove the soil.
• Rub metal finishes in the direction of the grain.
3
SELF CLEAN
3: 00
REMOVE RACKS
4: 00
SELF CLEAN
3: 00
Delayed CLEAN
SELF CLEAN
5: 45
SELF CLEAN END
SELF CLEAN