Electrolux EQT4520BOG - Manual (Page 8)

Display Description
-
The roasting zone operates.
+ digit
There is a malfunction.
/ /
OptiHeat Control (3 step Residual heat indicator) : continue cook-
ing / keep warm / residual heat.
Lock / The Child Safety Device function operates.
Automatic Switch Off function operates.
3.5 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/ / There is a risk of
burns from residual heat. The
indicator shows the level of
the residual heat.
4. DAILY USE
WARNING!
Refer to Safety chapters.
4.1 Activating and deactivating
Touch for 1 second to activate or
deactivate the hob.
4.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• All roasting zones are deactivated.
• You do not set the temperature after
you activate the hob.
• You spill something or put something
on the control panel for more than 10
seconds, (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or
clean the control panel.
• You do not deactivate a roasting zone
or change the temperature. After 90
minutes comes on and the hob
deactivates. Before next use, set the
roasting zone to .
4.3 The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat
setting or move your finger along the
control bar until you reach the correct heat
setting.
The display flashes until the roasting zone
reaches the temperature. Then a signal
sounds and the display shows the
temperature.
4.4 Bridge function
This function connects two roasting zones
and they operate as one. This function is
active automatically when you activate the
hob.
www.electrolux.com 8