AMX SIP Communications Gateway CSG-500 - Manual (Page 35)

Telephone System Configuration
27 CSG SIP Communications Gateway Operation/Reference Guide
Click Add when you have completed your changes, or Cancel to discard your changes.
Outgoing Calling Rules
An outgoing calling rule pairs an extension pattern with a trunk used to dial the pattern. This allows different
patterns to be dialed through different trunks (e.g. "local" 7-digit dials through an analog line but "long
distance" 10-digit dials through a low-cost SIP trunk). You can optionally set a failover trunk to use when the
primary trunk fails. The Outgoing Calling Rules give you the ability to use basic pattern matching to
differentiate outbound calls and route them accordingly. The tab displays each outgoing calling rule
established and the service providers assigned.
FIG. 20 Outbound Calling Rules
Outbound Calling Rules manages only individual outgoing call rules. See the Dial
Plans section to associate multiple outgoing calling rules to be used for User
outbound dialing.