System log messages – Canon VB-C300 User Manual
Page 86
4-6
Log Messages
● B103 Client forcibly disconnected (notice)
● B301 Transmission audio device error (err)
● B401 Audio device initialization failed (crit)
● B402 Audio Server initialization failed (crit)
● B403 Setting change failed (crit)
■ System Log Messages
● S004 System start and stop (info)
● S005 System setting changed (info)
● H043 User specification error (notice)
Message
%1 request denied [%2]
%1
Client host IP address
%2
Rejection type (41 | 43 | ...)
Explanation
Although connection was allowed at the start of session, the settings have been changed to ban
the client access and the client has been forcibly disconnected from the Audio Server (the rejection
types are the same as B102).
Message
cannot use audio device for tx [%1 : %2]
%1
Error process (ld | buff)
%2
Error number
Explanation
An audio device error has been detected.
Countermeasure
Reboot the Camera. If the problem persists, it is an Audio Device failure. Call for service.
Message
audio device initialization error [%1]
%1
Error number
Explanation
The Audio device failed to initialize itself. The Audio Server stops.
Countermeasure
Reboot the Camera. If the problem persists, it is an Audio Device failure. Call for service.
Message
wvaudio initialization error [%1]
%1
Error number
Explanation
The Audio Server failed to initialize itself. The Audio Server stops.
Countermeasure
Reboot the Camera. If the problem persists, it is an Audio Server failure. Call for service.
Message
cannot set config [%1]
%1
Error number
Explanation
Update of settings failed. The Audio Server stops.
Countermeasure
Reboot the Camera. If the problem persists, it is an Audio Server failure. Call for service.
Message
%1 webview
%1
Start (starting) or stop (stopping)
Explanation
This message indicates start or stop of the Video Server (webview).
Message
%1: user %2 not found: %3
%1
Client host IP address
%2
User Name
%3
URL
Explanation
An unknown user has been specified in user authentication.
Message
System settings updated
Explanation
The settings have been changed without reboot.