Canon VB-C300 - Manual (Page 19)

1-13
Detailed Settings
▼Audio Server
1 Enable Audio Transmission
If you check this option, you can send audio to NC Viewer, through a microphone with amp
connected to the camera.
2 Input Volume
Specify the input audio volume from 1 to 100. The audio will be louder when you enter a larger
value.
3 Enable Voice Activity Detection
Select this option, the camera transmits minimal data when audio is turned mute. In this way,
you can reduce the network load.
4 Enable Audio Reception
If you check this option, you can receive audio from the NC Viewer and output it from a
speaker with amp connected to the camera.
5 Output Volume
Specify the output audio volume from 1 to 100. The audio will be louder when you enter a
larger value.
6 Disable Echo Canceller
If you uncheck this option, echo between a microphone and speaker with amp can be avoided.
6
5
4
3
2
1
Setting HTTP Server, Video Server, and Audio Server (Server)