beautypg.com

Log messages, The vb-c300 log messages, Camera messages – Canon VB-C300 User Manual

Page 84

background image

4-4

The VB-C300 Log Messages

The log messages are classified into the following five categories.

Log Messages

Camera Messages

A001 Camera start failure (crit)

A002 Protocol initialization failure (err)

A011 Camera control device error (warning)

A012 WebView Livescope client start and stop (info)

A016 Video data transmission quantity (info)

Classification

Level

Error level

crit

Error

A critical failure at software level (task stops).

err

Error

A failure affecting camera operation (task continues).

warning

Warning

A failure not affecting the camera operation.

notice

Warning

A failure external to the system.

info

Information

Information concerning normal operation.

Message

no %1 installed

%1

sources | protocols

Explanation

Camera failed to capture images or initialize the protocol and could not start.

Countermeasure

Reboot the camera. If the problem persists, it is a camera failure. Call for service.

Message

%1 protocol not installed

%1

Protocol type (LS/H)

Explanation

The camera failed to initialize the WebView. Configuration data may be destroyed.

Countermeasure

Restore the factory default settings or press the Reset switch.

Message

%1@%2 %3

%1

Client type (LS/H)

%2

Client host IP address

%3

connected | closed

Explanation

The HTTP WebView client (LS/H) has started or stopped.

Message

%1@%2 %3 frames / %4 bytes in %5 seconds

%1

Client type (LS/H)

%2

Client host IP address

%3

Number of frames

%4

Number of bytes

%5

Video transmission period

Explanation

This message indicates the results of video transmission to the client.

Message

%1 malfunction (%2)

%1

Camera type (Canon VB-C300NA | Canon VB-C300PA)

%2

Error (read | write | timeout | ...)

Explanation

An I/O error for the camera control device has occurred.

Countermeasure

If the problem persists, it is a camera failure. Call for service.