Connecting to another camera, Previous access points, Connect to another camera – Canon PowerShot SX510 HS User Manual
Page 108
108
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
Tv, Av, and M
Mode
Previous Access Points
You can reconnect to any previous access points automatically by following
step 3 in “Connecting without an Access Point” (
•
To use the camera as an access point, choose [Switch Network] on the
screen displayed when you establish a connection, and then choose [Set
Camera As Access Point].
•
When reconnecting via a previous access point, connect the target
device to the access point in step 4.
•
To switch access points, choose [Switch Network] on the screen
displayed when you establish a connection, and then follow the
procedure in “Connecting to WPS-Compatible Access Points” from step 6
Connecting to Another Camera
Connect two cameras via Wi-Fi and send images between them as follows.
•
Only Canon-brand cameras equipped with a Wi-Fi function can be connected
to wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot
be connected to if they do not have a Wi-Fi function. You cannot connect to
PowerShot SD430 DIGITAL ELPH WIRELESS/DIGITAL IXUS WIRELESS
cameras with this camera.
1
Access the Wi-Fi menu
).
2
Choose camera.
z
z
Press the <
o>
turn the <
5> dial to choose [4], and
then press the <
m> button.
3
Choose [Add a Device].
z
z
Press the <
o>
buttons or turn the
<
5> dial to choose [Add a Device], and
then press the <
m> button.
z
z
Follow steps 1 – 3 on the target camera
too.
z
z
Camera connection information will be
added when [Start connection on target
camera] is displayed on both camera
screens.