Reference video signal output, Reference video signal output 90, Cop y – Canon EOS C500 User Manual
Page 90

Synchronizing with an External Device
90
Reference Video Signal Output
You can output the camera’s video signal as a reference sync signal (analog blackburst or tri-level signal) through
the SYNC OUT terminal to synchronize an external device to this camera.
In
mode, you must first set [¤ TC/UB Setup] > [Time Code]
> [24P TC/Sync] to [Normal], which is the default setting. In
mode or if the default setting has not been changed in
mode, start
from step 3 below.
1 Open the [24P TC/Sync] submenu.
[¤ TC/UB Setup] > [Time Code] > [24P TC/Sync]
2 Select [Normal] and then press SET.
3 Open the [Output] submenu.
[
4K/2K/MXF Setup] (in
mode) or [¢ Video Setup] (in
mode) > [SYNC OUT] > [Output]
4 Select [HD Sync] (tri-level signal) or [Blk Burst]* (black burst) and
then press SET.
• If necessary, select [Normal] or [XF Legacy] with the [¤ TC/UB
Setup] > [Time Code] > [24P TC/Sync] setting.
• If necessary, adjust the scan mode with the [
4K/2K/MXF Setup]
> [SYNC OUT] > [Scan Mode] setting.
* Not available for 24.00 Hz recordings.
Synchronization signal summary
* HRAW only.
Operating modes:
Video configuration for recording
SYNC OUT terminal
System
priority
Recording
mode
Resolution
Frame rate
HD Sync
1
Blk Burst
Normal
2
XF Legacy
4K
RAW
4096Ч2160
3840Ч2160
59.94P
1080/29.97 (P/PsF)
1080/59.94i
480/59.94i
29.97P
23.98P
1080/23.98 (P/PsF)
50.00P
1080/25.00 (P/PsF)
1080/50.00i
576/50.00i
25.00P
24.00P
1080/24.00 (P/PsF)
1080/60.00i
–
HRAW
4K1K RAW
4096Ч1080
3840Ч1080*
59.94P
720/59.94P
720/59.94P
480/59.94i
50.00P
720/50.00P
720/50.00P
576/50.00i
2K
12-bit
10-bit
2048Ч1080
1920Ч1080
59.94P
1080/29.97 (P/PsF)
1080/59.94i
480/59.94i
29.97P
23.98P
1080/23.98 (P/PsF)
50.00P
1080/25.00 (P/PsF)
1080/50.00i
576/50.00i
25.00P
24.00P
1080/24.00 (P/PsF)
1080/60.00i
–
10-bit
2048Ч1080
1920Ч1080
59.94P
720/59.94P
720/59.94P
480/59.94i
50.00P
720/50.00P
720/50.00P
576/50.00i
mode
[¤ TC/UB Setup]
[Time Code]
[24P TC/Sync]
[Normal]
mode:
[
4K/2K/MXF Setup]
mode:
[¢ Video Setup]
[SYNC OUT]
[Output]
[Composite]
COP
Y