Canon EOS C500 - Manual (Page 180)

Displaying the Status Screens
180
Displaying the Status Screens
You can use the status screens to check the camera’s various recording- and playback-related settings. You can
also output the status screens on an external monitor.
1 Press the STATUS button.
• The status screen most recently displayed will appear
unless you turned off the camera or changed the operating
mode. In such case, the [Camera] status screen appears in
mode and the [Assign Button 1/2] status screen
appears in mode.
2 Push the joystick up/down or use the SELECT dial to
scroll through the status screens.
3 When you are finished, press the STATUS button again
to exit the status screens.
• Alternatively, you can press the MENU or CUSTOM
PICTURE button. Doing so will exit the status screen and
open the respective menu.
,
1 2 only.
2
Does not appear in the [Photos] index screen.
3
These screens appear only after a custom picture file has been selected.
4
These screens appear only when the optional WFT-E6 Wireless File Transmitter is attached to the camera and an active access
point has been activated with the [w Other Functions] > [Wi-Fi Remote] setting.
Operating modes:
Status screen Description A
[Gamma/Color Space] Displays the output settings for each terminal. Also displays the
gamma and color space settings of the video on the screen and the
video to be recorded on a CF card.
Ü – 181
[Camera] Displays settings related to recording, such as ISO speed/gain, iris
1
and shutter speed increments, peripheral illumination correction 1 and
attached lens model information
1
.
Ü – 181
[Assign Button 1/2],
[Assign Button 2/2]
Allows you to verify the current function of each assignable button. Ь Ь 181
[Audio] Displays settings related to audio. Ь Ь 2
182
[Media] Displays information about the recording media. Ь Ь 182
[4K/2K/MXF 1/2],
[4K/2K/MXF 2/2]
Displays the settings for the video terminals and for MXF clips.
Ü –
183
[Video] – Ü
[Metadata 1/2], [Metadata 2/2] Displays the user memo and other metadata that will be recorded
with clips.
Ü – 183
[Battery/Hour Meter] Allows you to check the remaining battery time, battery life and how
long the camera has been in operation.
Ь Ь 184
[/ Data 1/3], [/ Data 2/3],
[/ Data 3/3]
3
Displays the settings for the custom picture file that will be
embedded into clips.
Ü –
184,
185
[Wi-Fi Remote 1/4] to
[Wi-Fi Remote 4/4]
4
Displays settings related to the configuration of the optional WFT-E6
Wireless File Transmitter and the Wi-Fi network setup. For more
details, download the “WFT-E6 Wireless File Transmitter - Guide for
Canon Camcorders” (PDF file) from your local Canon Web site and
follow the instructions to complete the necessary setup.
Ü – –
COP
Y