Reviewing an mxf clip, Reviewing an mxf clip 104, 104) to – Canon EOS C500 User Manual
Page 104: Cop y
Reviewing an MXF Clip
104
Reviewing an MXF Clip
When the camera is in
mode, you can review the last clip that was
recorded on a CF card.
1 Open the [Rec Review] submenu to set the review length.
[w Other Functions] > [Rec Review]
2 Select the desired option and then press SET.
3 After you finish recording, press the
u
button.
• The last clip that was recorded is played back without audio for the
selected duration. [Ð REVIEW] appears at the top of the screen.
• Press the CANCEL button to stop reviewing the clip and change the
camera back to record pause mode.
• After the clip finishes playing back, the camera returns to record pause
mode.
Options
NOTES
• When you are using a special recording mode (A 105), you cannot review a clip.
• If the camera switched CF cards during a recording, the camera will play back the clip on the CF card most
recently recorded on.
Operating modes:
[Entire Clip]:
Allows you to review the entire clip.
[Last 4 sec]:
Allows you to review just the last 4 seconds of the clip.
[w Other Functions]
[
Rec Review]
[Entire Clip]
COP
Y