Canon imagePROGRAF iPF815 - Manual (Page 5)

5
Lower the Ejection Guide.
Next, install the Printhead.
Instructions for Models That Include the Stationary Output Stacker as a Standard Accessory
Lift the Ejection Guide. Attach the four Ejection Support s (a) on the back of the
Ejection Guide .
Close the Top Cover .
Plug the power cord into the Power Supply Connector on the back
of the printer.
Plug the power cord into the outlet.
Press the Power button to turn on the
printer.
When Open top cover. is displayed
on the Display Screen , open the Top
Cover .
Pull the Printhead Fixer Lever forward
all the way to open it completely.
Lift the Printhead Fixer Cover to open it
fully.
Instructions are now shown on the
Display Screen regarding Printhead
installation.
When the following screen is displayed,
press ▲ or ▼ to select the language
used on the display screen, and then
press the OK button.
Make sure your local time zone is
selected, and then press the OK button.
Instructions for Models That Include the Stationary Output Stacker as a Standard Accessory
8
6 7
Install the Printhead
1
4 5 6
4 5
a
2 3
OK
OK
Time Zone
0:London (GMT)
+1:Paris,Rome
+2:Athens,Cairo
+3:Moscow
+4:Eerevan,Baku
+5:Islamabad
Time Zone
0:London (GMT)
+1:Paris,Rome
+2:Athens,Cairo
+3:Moscow
+4:Eerevan,Baku
+5:Islamabad
OK
Language
English
ᣣᧄ⺆
Français
Italiano
Deutsch
Español
Language
English
ᣣᧄ⺆
Français
Italiano
Deutsch
Español
9