Canon imageCLASS MF5960dn - Manual (Page 15)

15
2.
Select the fax receive mode.
The receive mode is set to .
→ Proceed to Step 3.
• Receive faxes automatically.
• The telephone functions do not be used.*
* When the telephone is connected in the auto receive mode, the
telephone rings when receiving a fax or telephone call. You can
answer the telephone while it is ringing. To turn off the telephone
ringer, see “Incoming Ring” in the e-Manual.
Do you want to use
this machine for fax
only (no telephone)?
Yes
No
Do you want to auto-
receive faxes and
answer phone manually?
Yes
No
Do you want to use
an answering machine
to answer the phone?
Yes
No
The receive mode is set to .
→ Proceed to Step 3.
• Receive faxes automatically.*
• Responds to a telephone call by picking up
the handset.
* The telephone rings on incoming calls. To turn off the telephone
ringer, see “Incoming Ring” in the e-Manual.
The receive mode is set to .
→ Proceed to Step 3.
• Receive faxes automatically.
•
Respond to telephone calls using the
built-in answer function.
• Ring on incoming calls or faxes.
The receive mode is set to .
→ Proceed to Step 3.
• Respond to incoming calls or faxes
by picking up the handset.
• Ring on incoming calls or faxes.
You can specify how the machine should operate for a fax call or telephone call.
By answering the prompts that appear on the display, the machine will be set to one of the following four operation modes.
Yes
Yes
Yes
No
No
No
Preface
1
Installing the Machine
2
Configuring and Connecting the Fax
3
Connecting to a Computer and
Installing the Drivers
4
Appendix