Prepare for wireless lan connection, Check the following first, Switch the connection method to wireless lan – Canon imageCLASS MF4880dw User Manual
Page 2
2
Prepare for Wireless LAN Connection
Step 1
Check the Following First.
Step 2
Switch the Connection Method to Wireless LAN.
Is the computer connected to the router (or the
access point) properly?
For more information, see the instruction manual for the
network device you are using, or contact the networking
device manufacturer.
Have the network settings on the computer
been completed?
If the computer is not properly confi gured, you may not
use the wireless LAN connection even after completing
the following settings.
NOTE
•
You cannot connect both a wired LAN and wireless
LAN at the same time. In addition, the machine is set
to the “Wired LAN” by default.
•
When you connect to a network environment that is
not security protected, your personal information may
be disclosed to third parties. Please use caution.
•
If you connect through a LAN in the offi ce, contact
your network administrator.
Internet
Router
Menu
Network Settings
Preferences
Timer Settings
Copy Settings
Network Settings
Select Wired/Wireles
Wireless LAN Settin
...
TCP/IP Settings
SNMPv1 Settings
Select LAN
Wired LAN
Wireless LAN
Configuring
settings...
When proceeding from “Connecting the Power Cord” in the Starter Guide
Proceed to “Check Your Router.” on P.3.
(Menu)
Press [▲] or [▼] to
highlight an option.