Canon imageCLASS MF4880dw User Manual
Page 15
15
Troubleshooting
Could not connect.
Check PSK settings.
Close
Action
•
Enter the correct network key and repeat the setup.
If the message still appears:
Check network connection referring to “Cannot Connect to the Network” (P.18).
Shared Key auth.
failed. Check WEP
settings.
Close
Action
•
Enter the correct network key and repeat the setup.
If the message still appears:
Change the WEP encryption on the router to “Shared Key,” or change the WEP
authentication method on the machine to
Confi gure all the settings manually to change the setting to
(See the e-Manual)
Open authentication
failed. Check WEP
settings.
Close
Action
•
Change the WEP authentication method on the machine to
Confi gure all the settings manually to change the setting to
(See the e-Manual)
If the message still appears:
Change the MAC address for the machine and the computer you are using to the
allowed settings.
Prepare for Wireless LAN Connection
1
Setting the Wireless LAN
2
Installing the Software
3
Troubleshooting
4