Canon EOS-1D C - Manual (Page 10)

9
Introduction
Playing Back
Confirming File
Information
Saving
Exiting EMU
Reference
Contents
Preparation
Basic
Screen
Without modification, movies shot with Canon Log gamma (p.2) set to
[On] will look dark and have low contrast. If you apply a look-up table
(LUT) and play back the clip, you can check the clip with an image close
to normal display.
1 Checkmark the [LUT] checkbox.
● [LUT] is not available if movies were shot with Canon Log
gamma set to [Off].
2 Play back the selected movie.
● Perform the operations described in “Movie Clip Playback” (p.6) .
➜ The LUT is applied and the movie is played back.
You can check or uncheck the LUT checkbox with the key on
the board.
Playing Back Movies Shot with Canon Log
Gamma set to [On]
You can use the keyboard for the following operations.
1 Play back a movie.
● Follow operations in “Movie Clip Playback” (p.6) .
2 In the main window, select the [View] menu X [Full
Screen].
➜ The movie played back is displayed in full screen.
● You can also double-click the preview image to display the movie
in full screen.
● To cancel full screen display, press the key or double-click
the preview image.
Keyboard Operation
Play/Stop
< > Previous frame
< > Next frame
Move to first frame
Move to last frame
Enable/Disable look-up table (LUT)
Play
Stop
Adjust playback speed
Switch display mode ([100% view]/[Fit to window])
Playing Back in Full Screen
Operations Using Keyboard
COP
Y