Canon PC170 - Manual (Page 39)

Operating Procedure
37
2
V
arious W
ays to Copy
Position the second original onto the
platen glass so that the top edge is to the
left.
ABC
12
3
Turn the copy of the first original over as
shown. Then, place it into the multi-stack
tray again.
ABC
12
3
Make a copy of the second original.
NOTICE:
• 16 to 32-lb bond paper can be used when
making two-sided copies.
• If the copy paper becomes curled during the first
copy pass, smooth it flat before proceeding with
the second copy.
MEMO:
• If several sheets are placed into the multi-stack
tray during two-sided copying, the leading edge
of the back sides of the paper can become
smeared with toner. If this occurs, place the
paper one sheet at a time into the multi-stack
tray.
Copying Thick Books
or Large Originals
When copying thick books, large
originals or three-dimensional
objects, detach the platen cover
as explained below to make it
easier.
Grip the platen cover gently with both
hands, as shown in the illustration, and
lift it about 1/4” upwards.
02/ PC150-USA 5/11/04, 4:55 PM 37