Canon EOS 1200D - Manual (Page 46)

45
1
2
3
4
Introduction
Contents at
a Glance
Downloading
Images
Camera
Settings
Remote
Shooting
Reference
Preferences
Index
Focusing Using Face Detection Live Mode
1 Select [Face Detection Live mode] from the list box.
 When a face is detected, an AF point appears.
 When there is a face other than the face detected in the scene, a
new AF point appears if you move the cursor to the position of
the other face. The AF point is selected by clicking that position.
 You can switch between showing and hiding the AF point by
clicking the [
] button.
2 Click the [ON] button.
 AF is executed.
 When focus is achieved, the camera makes a beeping sound
and the AF point turns green.
 If focus is not achieved, the AF point turns red.
 If the camera cannot detect a face, the AF point is fixed to the
center to focus.
1D X 1D C 1D Mk IV 5D Mk III 5D Mk II 6D 7D
60D 50D REBELT3i 600D REBELT2i 550D REBELT1i
500D REBELT5 1200D REBELT3 1100D
Focusing Using Face+Tracking
1 Select [Face detection + Tracking AF] from the
[Focus] list box.
 When a face is detected, an AF point appears.
 The AF point also tracks the face if the face moves.
 When there is a face other than the face detected in the scene, a
new AF point appears if you move the cursor to the position of
the other face. The AF point is selected by clicking that position.
 You can set continuous AF to on/off with the [Continuous AF]
box. When shooting movies, the [Continuous AF] box changes to
the [Movie servo AF] on/off box.
 You can switch between showing and hiding the AF point by
clicking the [
] button.
2 Click the [ON] button on the [Focus] list box.
 AF is executed.
 When focus is achieved, the camera makes a beeping sound
and the AF point turns green.
 If focus is not achieved, the AF point turns red.
 If a face is not detected, the mode changes to [FlexiZone-Multi]
(p.46) .
70D REBELT5i 700D REBELSL1 100D REBELT4i 650D
COP
Y