Canon VB-M700F - Manual (Page 70)

70
Select [All of the following are met] to display only
cameras that meet all the criteria. Select [Any of the
following are met] to display cameras that meet any of
the criteria.
(3) [When conditions are not met, continue displaying
cameras for]
Specify how long a video window in the layout will
remain displayed when it does not match the criteria
specified here.
(4) [OK] and [Cancel]
Close the dialog box.
Note
The maximum number of dynamic layout video windows that can
be displayed is 25.
Switch Between Layouts
The menu is separated into two sub-menus:
• Shared layouts
Displays shared layouts under the name of the Storage
Server Group. The [Layouts] menu shows the Storage
Server Groups.
All users have access to the layouts, however, only the
administrator can make changes to them.
• User layouts
Displays layouts created by the currently logged in
user. These layouts are not available to other users.
Configure a Layout Sequence
(1) [Sequence Name]
Enter the name of layout sequence.
(2) [Type]
Specify the type of layout sequence.
(3) [Available Layouts]
Displays a list of available layouts.
(4) [Add Layout]
Add the selected layout to the [Sequence Layouts]
list.
(5) [Move Up] and [Move Down]
Move the selected layout up or down in the list to
change the sequence order.
(6) [Remove Layout]
Remove a layout from the list.
(7) [Sequence Layouts]
Displays a list of layouts in the order of the layout
sequence.
(8) [Interval]
Specify the display time of each layout in the
sequence, from 5 to 9999 seconds.
(9) [OK] and [Cancel]
Close the dialog box.
Storage
Server Group is
isn’t The name of
Storage Server
Group to which
the Viewer is
connected.
3 Click [OK] to close the dialog box.
4 Click [File] > [Save Layout].
5 Change the layout name as required and click [OK].
1 Click [Layouts] on the toolbar to display a menu for
selecting existing layouts.
2 Select a layout.
Property
Operator for the
decision
Status
1 Click [Layouts] > [New Layout Sequence] to display
the [New Layout Sequence] dialog box.
2 Specify the layouts to be displayed in the sequence.
(2)
(1)
(3)
(9) (6) (4) (7)
(8)
(5)